Search

Model UV6 Analyzer

Model UV6 Analyzer

The Model UV6 Analyzers use UV absorption to measure Nitrate or the correlation at 254nm wavelength for COD, BOD, or TOC. UV6 Analyzers are easy to use, simply connect sample, waste and cleaning solution/reagent lines and power up the factory calibrated analyzer....

Model S80 Intelligent Sensors

Model S80 Intelligent Sensors

For use with ECD’s Model T80 Universal Transmitter, the Model S80 Intelligent Sensors is a product line designed to measure pH, ORP, Specific Ion, Dissolved Oxygen, Turbidity, Conductivity, or Resistivity in liquid applications. The sensors are highly...

Model T80 Series Universal Transmitter

Model T80 Series Universal Transmitter

The Model T80 Series Universal Transmitter offers continuous measurement of pH, ORP, pION, Dissolved Oxygen, Turbidity, Conductivity, or Resistivity in a general purpose environment. The Model T80 Transmitter can automatically configure to any of the listed...

LPGX1 Gas PSignature Series Ultrasonic Flowmeter

LPGX1 Gas PSignature Series Ultrasonic Flowmeter

LPGX1 series flowmeters are able to deliver accurate velocity and volumetric flow measurements over a large range of flow rates and in unsteady conditions. LPGX series flowmeters are designed for use in flare gas, vent gas, bio gas, fuel gas, and process gas...

NCR-25 & NCR-30

NCR-25 & NCR-30

LIQUID LEVEL RADAR Non-Contact Level Measurement of Liquified Materials The BinMaster NCR-25 and NCR-30 non-contact radar level sensors continuously measure all types of liquids contained in vessels up to 114 feet tall. The NCR-25 is best suited for water, fuels,...

BW Replacement Sensors for BW Solo Single-Gas Detector

BW Replacement Sensors for BW Solo Single-Gas Detector

The 1-Series sensor delivers fast response, reliable performance and longlife, even in extreme environments. It’s the next-generation sensor for the gases you monitor most.

USD $ 312.00 – USD $ 764.00

CAD: CAD $ 390.00 - CAD $ 955.00

MXR Type DE Desuperheater

MXR Type DE Desuperheater

The Type “DE” Desuperheater is custom-designed for direct injection of water vapor into a line containing superheated steam in a highly efficient fashion. Each unit employs 2 specially designed mixing modules to instantaneously mix the water mist with the...

MXR Type TH Tank Heaters

MXR Type TH Tank Heaters

Type “TH” Tank Heaters are custom-designed for direct injection of steam into a tank containing liquid or water compatible products in a noise-free, vibration-free and highly efficient fashion (up to 99% efficiency). Each unit employs 2 specially designed...

MXR Type SH In-Line Steam Heaters

MXR Type SH In-Line Steam Heaters

The Type “SH” Steam Heater is a high heating efficiency device (up to 99%) due to direct steam injection into the process line. No moving parts, low capital cost, minimize noise and vibration and practically no annual maintenance cost required. Using a...

MXR Type L-PD Low Pressure Drop Static Mixer

MXR Type L-PD Low Pressure Drop Static Mixer

MXR static mixers provide superior performance in the blending of chemical and petrochemical products. The type L-PD mixer provides a non-clogging design with a low pressure drop. Features & Benefits Low Pressure Drop & High Mixing Efficiency Roughly 65% lower...

MXR Type CM Custody Transfer Mixer

MXR Type CM Custody Transfer Mixer

The Type “CM” Custody Transfer Mixers employ a simple, reliable design to provide the ultimate in mixing. It achieves high mixing efficiency through multi-action mixing. The crude oil and water content are mixed through two-by-two division, cross-current...

Kurz K-BAR 2000B-WGF Insertion Mass Flowmeter (Multipoint)

Kurz K-BAR 2000B-WGF Insertion Mass Flowmeter (Multipoint)

K-BAR 2000B-WGF multipoint insertion flow meter is engineered specifically for wet stacks, condensing gas environments, and biogas applications. The K-BAR WGF processes the dry flow signal independent of the effects of moisture in the process gas stream. K-BAR...

CETCI Controllers

CETCI Controllers

Critical Environment Technologies Canada Inc. (CETCI) is a leading global manufacturer of fixed gas detection systems, including self-contained systems, controllers and transmitters (gas detectors), and Indoor Air Quality (IAQ) monitoring instruments. All standard...

CETCI Specialty Products

CETCI Specialty Products

Critical Environment Technologies Canada Inc. (CETCI) is a leading global manufacturer of fixed gas detection systems, including self-contained systems, controllers and transmitters (gas detectors), and Indoor Air Quality (IAQ) monitoring instruments. All standard...

CETCI Transmitters

CETCI Transmitters

Critical Environment Technologies Canada Inc. (CETCI) is a leading global manufacturer of fixed gas detection systems, including self-contained systems, controllers and transmitters (gas detectors), and Indoor Air Quality (IAQ) monitoring instruments. All standard...

Transus Ultrasonic Gas UIM-4F Duo Series Flowmeter

Transus Ultrasonic Gas UIM-4F Duo Series Flowmeter

The UIM-4F Duo is comprised of two fully independent systems. Main measurement is handled by the four path UIM-4F component and the redundant three path UIM-3 uses enhanced diagnostics to allow the user to perform condition based maintenance. By using three path...

RC Systems SenSmart 4000 Series

RC Systems SenSmart 4000 Series

The SenSmart 4000 2-wire 4-20mA loop powered gas detector accepts electrochemical gas sensors for oxygen and toxic gas detection. SenSmart 4000s utilize the popular “GEN 2 smart sensor” proprietary technology to provide sensor recognition and temperature...

Gas Detection Tubes UNIPHOS

Gas Detection Tubes UNIPHOS

UNIPHOS gas detection stain tubes are perfect for obtaining an accurate assessment of gas concentrations quickly and easily. The gas detection tubes come pre-calibrated and are easy to read (simply look at the length of colour that has developed). A full range of...

Gas Detection Tubes KwikDraw – MSA

Gas Detection Tubes KwikDraw – MSA

KwikDraw gas detector tubes provide a simple and reliable method of spot testing for hazardous chemicals present in gas samples. The gas detector tubes come pre-calibrated, take only a few minutes to complete sampling, and provide a clear chemical concentration...

Gas Sampling Bags

Gas Sampling Bags

Gas sampling bags are used to sample air quality for a wide range of contaminants. A variety of materials, fittings, and sizes are available to meet the specific sampling needs of the application. Available Materials ALTEF® Multi Layer Foil Barrier...

« Older Entries

Next Entries »

Recent Products