Snifter Series

Snifter A1+ is a low-cost easy to use filter leak detector. This filter leak detector is a direct replacement for the Snifter A1 device. Snifter A1+ can be used for monitoring outlets in a baghouse enabling fast identification of leaking compartments. Commissioning of the device is easy with the convenient auto setup function which identifies normal dust concentration within ten minutes of installation.

Snifter A2 is an advanced filter leak detector. This dust monitor can be used to monitor the operation of a baghouse and alarm the operator when dust levels increase. All parameters and settings are user selectable to best suit custom application needs.

Snifter mA+ brings whole new features to the Snifter series! With isolated 4-20 mA output this device is compatible with virtually all automation systems. Snifter mA+ can be used for monitoring filtration performance – on-line – continuously.

Features & Benefits

• Auto Set-up function for easy commissioning
• 3µm Particle Size or Larger
• Measurable down to 0.1 mg/m3
• Power Supply: 12 – 24 VDC
• Power Consumption: 3W
• Full compatibility with Sintrol Network and DustTool with USB and RS485 communication
• Alarm Settings
  • Automatic
    • Alert: 5x normal dust level
    • Alarm: 20x normal dust level
  • User selectable ranges
• EX models (IECEx and ATEX) available (not available for Snifter A1+)
• Wireless RF communication available
• Ambient Temperature Rating
  • Starting -20°C to +40°C (-4 to +104°F)
  • Running -20°C to +60°C (-4 to +140°F)
• Ambient Humidity: Max 95% RH (non-condensing)
• Process Contitions
  • Temperature: Max 250°C (482°F)
  • Pressure: Max 200 kPa (29 psi)
  • Gas Velocity: Max 3 m/s (9.8 ft/s)